Expected Ship Date: November 18th, 2024
Building on our experience with the S550 Mustang, we now have a clockspring pass through kit for the 21-23 F150. This kit will allow for up to 3 channels to be passed through the OEM clockspring allowing activation of various accessories, such as a transbrake/bump, scramble, etc. This prevents wires from getting tangled up in the steering wheel when turning.
This kit will allow you to activate up to 3 items via a low current ground signal passed through the clockspring. If you are needing to activate anything that draws more current than triggering a relay, a relay must be used or else damage to the circuitry in the clockspring can be damaged. If 12v signal is needed to activate your device/system, you can use our 6R80 Module (available here) for low current devices such as a two step, True Stager modules, or transbrake input to Leash devices. You can also use a relay to switch the signal to a 12v.
Each kit will include wires with preinstalled terminals for both the upper and lower clockspring connectors (3 of each), non insulated crimp barrels (6) and heat shrink (6). Also included is a link to comprehensive installation instructions.
Also available are our snap action buttons and brackets to attach the buttons securely to the steering wheel. The brackets will need to have holes drilled through the steering wheel to be secured and for wires to pass through. Included with brackets is all hardware needed to secure them, drill guide for properly locating holes, and appropriately sized drill bits.
Fitment:
- 2021 Ford F150
- 2022 Ford F150
- 2023 Ford F150
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
