NO ends WITH mounts
Heavy duty housing centers are constructed from .141” mild steel with a heavy duty .282” face plate. Tube insertion locations are slotted to allow complete and secure welding of the tubes to the housing. Internal plates gusset the housing and provide internal support to the ends of the tubes. The cover is designed to provide the clearance necessary for cases with heavy duty main caps and also allowing the use of 9 1/2” gear sets.
The housing is fitted with fill and drain plugs, tubed with your choice of .250” wall 3” or 3 1/4” mild steel tubing, and choice of mounts. Larger tubing is stronger, but many mounts are designed to fit a 3” tube. A builder might order this if they are unsure of the final width, or already has housing ends and an alignment jig. It may also be the base for a housing that will use a floater kit.
Includes: 3 1/4 OD tubes, fill & drain, and upper and lower control arm mounts and coil spring mounts in factory location.
Housing ends are NOT INCLUDED
Beefcake Racing is an Authorized Dealer for Strange Engineering Components, call 1-855-827-7223, 9am-9pm EST
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
