With ends NO mounts
Ultra Fabricated housing centers are constructed from .125” alloy steel
with a heavy duty .375” face plate. Triangulated design provides rigid
housing tube support for more consistent and straighter launches. Internal
radial gusset plates brace end of housing tube and increase overall housing
stiffness. Tube insertion locations are slotted for 5” to allow complete and
secure welding of the tubes to the housing. The housing is designed to provide the clearance necessary for cases with heavy duty main caps and also allowing the use of 9”, 9 1/2”, or 10” gear sets
The housing is fitted with fill and drain plugs, tubed with your choice of .250” wall 3” or 3 1/4” mild steel tubing, and choice of housing ends. Larger tubing is stronger, but your intended mounts may dictate tube diameter. Since the builder will be installing their own mounts, extreme care must be taken during the welding process as housing end alignment can be compromised. An alignment jig should be used afterwards to ensure that warping did not occur.
Includes: 3 1/4 OD tubes, fill & drain, and upper control arm mounts and choice of housing ends
Lower control arm and coil spring mounts NOT INCLUDED
Beefcake Racing is an Authorized Dealer for Strange Engineering Components, call 1-855-827-7223, 9am-9pm EST
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
