Strange 2005-2014 Mustang/Cobra Jet 9" Heavy Duty Housing - With Ends No Mounts HF9M05E

Strange Engineering 9" Heavy Duty Housing for 2005+ Mustang and Cobra Jet. The purpose for purchasing a housing like this, is for the builder that will be installing their own mounts and may also trim the tubing further.

 

With ends NO mounts

 

Heavy duty housing centers are constructed from .141” mild steel with a heavy duty .282” face plate. Tube insertion locations are slotted to allow complete and secure welding of the tubes to the housing. Internal plates gusset the housing and provide internal support to the ends of the tubes. The cover is designed to provide the clearance necessary for cases with heavy duty main caps and also allowing the use of 9 1/2” gear sets.

 

 

 

The housing is fitted with fill and drain plugs, tubed with your choice of .250” wall 3” or 3 1/4” mild steel tubing, and choice of housing ends. Larger tubing is stronger, but your intended mounts may dictate tube diameter. Since the builder will be installing their own mounts, extreme care must be taken during the welding process as housing end alignment can be compromised. An alignment jig

should be used afterwards to ensure that warping did not occur.

 

 

Includes: 3 1/4 OD tubes, fill & drain, and upper control arm mounts and late big ford ends.

 

Lower control arm and Shock/Sway bar brackets NOT INCLUDED

 

 

 

 

Beefcake Racing is an Authorized Dealer for Strange Engineering Components, call 1-855-827-7223, 9am-9pm EST