1964-67 Chevelle Malibu, Coated Steel, EFI, Gas
Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 255 lph fuel pump, internal baffling, a fuel level sender, and the filler neck. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! Supports up to 550 HP EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) ***Tank design is 1" deeper than stock tank due to designing clearance for the fuel pump assembly. The stock tank is too shallow to allow for internal EFI pump assembly. Size is: 37-1/4" x 30" x 7-3/4" ***Hose clamps are not included for two piece filler neck.
Install Notes:The GM A Body fuel tanks. Please pay special attention to the instructions when assembling your fuel gauge sender. You may need to remove one of the mounting screws in the assembly to reach your desired height as mentioned in the instructions. *** Some 1964 Models came with a 0-30 ohm range fuel gauge. If yours has it, you will need to order the 19-160 Sending unit additionally. *** GM Offered Two Depths of Fuel Tank Caps. If you have the deep reach (3/8"), you may have to switch to the shallow reach cap (1/4") depending on your application. Both styles are readily available at your local auto parts store.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
