Ram Clutches Force 9.5" Dual Disc 900 Series Clutch Kit (86-95 Mustang) 75-2240N

RAM 900 Series discs are the high tech alternative for all performance applications. Using a sintered iron friction material borrowed from high horsepower Pro Stock and Pro Modified clutches, 900 Series clutches provide extremely high coefficients of friction with minimal chatter and reduced static pressures. This type of material is engineered to provide a limited amount of 'slip' on engagement that allows the clutch to engage without overpowering the tires. All 900 Series discs use the high strength eight spring hub and Poly-coil springs for extreme dampening capabilities. This clutch disc is recommended for severe duty street and strip applications where driveability is not the highest concern. We recommend only RAM billet steel or aluminum flywheels for use with these discs.

The RAM Force 9.5 is the ideal entry level dual disc clutch for street use. With torque capacity to roughly 700-foot pounds and a moderate clamp pressure, it will handle small blower or turbo installations and provide a light pedal effort similar to the stock clutch. In fact, drivers of our 2010 Camaro test vehicle were not able to tell that the stock clutch was changed at all! The floater plate is driven from three sets of straps that eliminate any floater plate rattle at idle. The top clutch disc features a sprung hub assembly that absorbs the initial engagement of the clutch and reduces the chance of chatter on takeoff. This clutch is compatible with factory hydraulic release mechanisms except as noted in the application guide. It is compatible with all factory master cylinder systems when used in conjunction with a RAM hydraulic release bearing.

Applications:

• 93-95 Mustang 5.0L EXCL Tremec TKO Trans

• 86-95 Mustang 5.0L Hi-Clamp Severe Dute EXCL TKO

Beefcake Racing is an Authorized Dealer for Ram Clutches, call 1-855-827-7223 9am-9pm EST