Now available from PBH is a complete transmission cooler kit designed to work hand in hand with our 6R80 transmission fittings, perfect for most 6R80 or 10R80 swaps. The kit consists of a fanned transmission cooler, -8an fittings, and 20ft of -8an line. If you already have transmission adaptor fittings be sure to select the correct kit based on your outlet fitting orientation.
We also offer a complete transmission cooler kit that includes our transmission adaptor fittings, simply select the kit you need from the options below.
The Cooler:
- Mounts anywhere space permits
- Electric fan supplies optimum airflow
- Dramatically extends engine and transmission life
- High efficiency Stacked Plate cooler
- Clear anodized aluminum shroud
- 500 CFM reversible Tornado electric fan
- -8AN inlet size
- 46,000 BTU’s Per Hour
- Cooler assembly includes fan mounted cooler, aluminum -8AN fittings and two -8AN x 1/2″ hose barb fittings
Options:
PBH-621 - Does not include and is designed to be used with PBH-620 V2 -8AN 90 degree style transmission cooler adaptor fittings.
PBH-621 V2 - Does not include and is designed to be used with PBH-620 V2 -8AN straight style transmission cooler adaptor fittings.
PBH-624 V2 - Complete transmission cooler kit that includes, fanned cooler, lines, hose ends, and transmission adaptor fittings.
The 6R80 and 10R80 transmissions have an internal thermostat which opens at 180 degrees. If you are running a fanned cooler with straight 12v power, this means that the fan will be on even before transmission fluid hits the core. To control this, just add this 180 degree switch. Installation is simple, just connect this fitting to any of the an lines in the cooling system. Then run your 12v power for the fan through the switch. The switch will turn on the fan at 180 degrees and shut off at 165 degrees.
-8an male to -8an female
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
