If you’ve added boost to your Mustang GT… you’ve made the right move. The only thing you’re missing now is an Oz Tuning Alpha Tune! Let us optimize performance, power delivery, drivability, and transmission functions to match the power your rig is now capable of. Like all Oz Tuning tunes, our forced induction tunes are designed to provide maximum horsepower, while still maintaining safety and reliability. We are the Forced Induction experts!
Info on the tune: 2018-2020 Roush superchargers have much smaller intercoolers mounted below the head unit so they are not good at all at keeping AIT’s down. So for this reason, and through extensive testing with mods to help cooling, the only effective way to tune these is with a larger pulley. Sounds counterintuitive, but by lowering the amount of boost, temps are no longer the enemy. Then with our tune, we can add more, safe power. GRIPTEC 88MM PULLEY IS INCLUDED AND REQUIRED (R588mmB3Z6)!
NOTES:
- Roush tune required. (You must already have the Roush Tune for us to tune your vehicle)
- HP Tuners programmer is required.
- All Forced Induction tunes will require extensive datalogging which requires a Windows based laptop. Instructions will be provided, but you will need to be comfortable with downloading and emailing file attachments to complete the tuning process. (Remote dyno tuning is available.)
- Forced induction tunes require premium fuel (91 octane or higher) and are built for a SINGLE FUEL OCTANE.
- After purchasing your tune you must fill out a complete Tune Form before we can build your base tune.
- Please be aware that some newer Roush calibrations may not be fully supported in HP Tuners VCM Suite, and will require an additional checksum validation before we can write your tune. We have no way to know this prior to receiving your “stock” read file. In the event that your calibration is not fully supported, we will submit a support request on your behalf to HP Tuners to have the file fixed and support added. Wait time to resolve this issue can be extended, however there is no possible way to tune your vehicle until the file is fully supported. This means that anyone that attempts to tune the vehicle will have this same issue to resolve, and you will have the same (or possibly longer) wait time.
- Flashing this tune requires using the new TDN phone app for MPVI2/2+/3 users. (A Windows laptop is still required for KAM resets, speedo calibrations, and extensive datalogging. The app can only be used at this time for flashing tunes and diagnostics).
- MPVI2/2+/3, RTD/+/3 Interface required! Regular MPVI2’s and RTD’s are not compatible with iOS. Only the + (plus) or 3 models are.
A Tune Form must be submitted after placing your order. The Tune Form will be emailed to you.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
