Unlock the potential of your LS7 7.0L Corvette C6 with Magnuson’s TVS2300 Supercharger System
Available for the 2006-2013 C6 Chevrolet Corvette, this bolt-on supercharger is designed to deliver maximum performance while retaining factory-like drivability and reliability. Producing 6 pounds of boost, the Magnuson TVS2300 Hybrid Roots Style Supercharger delivers power gains of around 120 hp and 120 ft-lbs of torque at the rear wheels! But peak numbers cannot tell the whole story. "Under the curve" power is significantly enhanced delivering near instantaneous boost and torque upon demand when it really counts. Please note that this system requires and aftermarket hood for installation, and is not included.
Inside of the supercharger manifold, a big liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system with IATs that are typically only 20-40 degrees (Fahrenheit) over the ambient temperature.
Maximizing your engine's efficiency during cruising is the job of the supercharger’s integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to “free-spin" under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like drivability and fuel economy - giving you a package that delivers power without compromise.
Down to the smallest part, our Magnuson line of bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front and rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don’t lose track of parts in the middle of your install. All of the hardware needed for a full and complete install is also included so you won’t be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step Installation Manuals will walk you through the install process with exacting attention to detail.
Magnuson’s TVS2300 supercharger utilizes EATON’s latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the Mustang GT500. These Twin Vortices Series Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson’s patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in our TS16949 certified facility – the highest ISO OEM quality certification standard in the market. It is also designed to be nearly maintenance free so you won’t need to worry about anything once it is installed.
Features:
- TVS2300 Heartbeat Hybrid-roots supercharger
- Clears the factory Corvette hood and requires no body modifications (* requires removal of the hood liner, or maintain the factory hood liner with 0.25" subframe spacers from Lingenfelter)
- Weighs 17 pounds less than the standard TVS 2300
- TVS2300 Front-Inlet Front-Drive rotors, utilizes the same Eaton technology as the Corvette ZR1 LS9
- Provides cooler discharge temperatures than comparable twin-screw systems
- Advanced high-flow inlet forward design
- Includes Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
- Acoustically designed to minimize noise, vibration, and harshness (NVH)
- Better air-handling characteristics than comparable superchargers
- 100% complete bolt-on system which can be installed in one day
- More power in a smaller package
- Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
- Delivers a proven increase in real world "under the curve" power
- High thermal efficiency
- 2.4 pressure ratio capability
- High helix four-lobe rotors with 160 degrees of twist
- Redesigned inlet and outlet ports
- Utilizes all factory "push-lock" connectors
- Displacement on demand hardware retained for improved fuel economy
- Components have been independently tested to GM’s specification
- CARB EO D-488-34
Fitment:
- 2006 Chevrolet Corvette Z06 LS7 7.0L V8
- 2007 Chevrolet Corvette Z06 LS7 7.0L V8
- 2008 Chevrolet Corvette Z06 LS7 7.0L V8
- 2009 Chevrolet Corvette Z06 LS7 7.0L V8
- 2010 Chevrolet Corvette Z06 LS7 7.0L V8
- 2011 Chevrolet Corvette Z06 LS7 7.0L V8
- 2012 Chevrolet Corvette Z06 LS7 7.0L V8
- 2013 Chevrolet Corvette Z06 LS7 7.0L V8
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
