IHC Suspension is excited to announce our Performance line for 2015-2021 F150’s. After multiple requests and getting feedback from the performance world, IHC delivered. Introducing 100% full bolt on 3/5 lowering kit. Catering to the DIY and experienced tech. Making it as simple as possible to install without cutting or welding.
Kit Components
FRONT
- Adjustable UCA with Billet IHC CAP
- 2 Direct fitment QA’1 Coil overs
REAR
- Flip kit
- Bolt on shock relocation kit
- 2 dual adjustable qa1’s
- Traction bars
- FRONT SUSPENSION – works with 100% direct bolt on DUAL adjustable QA’1 coil over. Running 4″ OD springs. What does 4″ OD mean? Outside diameter. OEM springs measure 5″ OD, and most competitors were using 3″ which is way smaller than recommended. Technically it works but customers will complain about ride quality being too stiff. IHC working closely with QA’1 engineering 4″ spring and OEM style billet brackets to directly on to vehicle. No need for brackets on brackets that make installation difficult. IHC also includes standard fully adjustable UCA for camber correction. No need to spend more money on additional part to get alignment dialed in. This is a huge plus because you do once, and you do it right! IHC upper arms also have serviceable ball joint and bushing. IHC runs DELRIN bushing for maximum performance.
- REAR SUSPENSION– work with standard 5″ flip kit. What makes us stand out is our 100% bolt on shock relocation kit and on vehicle adjustable traction bars. IHC 100% bolt on (NO CUTTING, NO WELDING, NO DRILLING) shock relocation kit positions both shocks behind rear axle making it more practical for drag racing. IHC includes DUAL adjustable QA1 rear shocks to match the front. No mix and matching. Dual adjustable let you fine tune your shock to street or drag by as simple as twisting a knob on qa1 shock. IHC rear traction bars are also 100% bolt on. Fully adjustable on the vehicle to set pre-load on leaf pack. What does on the vehicle adjustable mean? The traction bars have jam nuts that can be backed off and you can either set pre-load on leaf pack to head out to the track, preventing squatting, hopping, or vibration when drag racing. Once you’re heading home simply loosen jam nut and back off on pre-load to release tension on leaf pack. Most competitors you have to complete disassembly traction bars to set pre-load which means wasting time!
This kit will only work on single cab 2wd and 4wd.
NOTE: If your vehicle is equipped with VDS you may have suspension light illuminated on instrument cluster. IHC performance kit is designed to replace front and rear shocks
Fits:
- 2021 Ford F-150 Regular Cab 2wd / 4wd
- 2022 Ford F-150 Regular Cab 2wd / 4wd
- 2023 Ford F-150 Regular Cab 2wd / 4wd
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
