Description:
FuelTech's EGT-4 CAN is a 4-channel signal conditioner with CAN bus communication for use with PowerFT ECU's including the FT450, FT550, FT550LITE, and FT600. When paired with a PowerFT ECU, the EGT-4 acts as an input expander, removing up to 4 type K thermocouple inputs (grounded junction or not), such as EGT's, CHT's, oil, air, water, or other temperatures from the white ECU input channels by allowing them to communicate via the CAN bus network. Up to 4 EGT-4 modules may be used in the same installation, making up to 16 input channels available for additional data acquisition.
PACKAGES
V8 / 2 units, harnesses and 8 sensors:
w/ 2 harnesses
2 of each 42"/36"/30"/24" Thermocouple sensors included
Add second EGT-4 CAN unit
6 cylinder / 2 units, harnesses and 6 sensors:
w/ 2 harnesses
48"/42"/36"/30"/24"/18" Thermocouple sensors included
Add second EGT-4 CAN unit
4 cylinder / harness and 4 sensors:
w/ harness
42"/36"/30"/24" Thermocouple sensors included
4 rotor / harness and 4 sensors:
w/ harness
4 of the 36" Thermocouple sensors included
3 rotor / harness and 3 sensors:
w/ harness
3 of the 36" Thermocouple sensors included
2 rotor / harness and 2 sensors:
w/ harness
2 of the 36" Thermocouple sensors included
TECH DESCRIPTION
Inputs: 4 type K thermocouple inputs
Outputs: 1 CAN
Dimensions:
EGT-4 CAN : 4.33 x 2.28 x 0.7 in
EGT-4 CAN Packaging: 8.78 x 6.38 x 2.36 in
Weight:
EGT-4 CAN : 4.87 oz
EGT-4 CAN Packaging without harness 78.75 in: 12.13 oz
Contents of packaging:
1 EGT-4 CAN
1 Installation and operation manual
Warranty:
Worldwide: 1 year
Part Number: 5022007368 / 2001006497
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
