All Exedy Hyper Multi-Plate clutches come with a lightweight, chromoly steel flywheel and the famous purple anodized forged aluminum clutch cover. Depending on the application, we have both strap drive and lug drive models. All have T5001 cerametallic friction materials for extreme heat resistance. Surprisingly, even with it’s additional power capability, most multi-plate clutches exhibit light pedal pressure thanks to a half-engaged zone provided by the patented clutch cushion function.
SD Type
This model has been developed for high powered street cars and race cars with up to approximately 600TQ at FW. They feature ventilated, thick intermediate plates for improved life and spring damper discs to protect your transmission and drive line.
SR Type
These clutch covers are designed to achieve a clamping load that is approx. 40 percent higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates and, high burst strength can be achieved in all temperature ranges.
HR Type
This model has three plates and is developed specifically for high power applications such as over 800 ft/lbs of torque at the flywheel for drag racing. It handles high torque loads and shifts smooth, and because of the lightweight clutch discs, you can reduce your shift times.
Hyper Twin Cerametallic Clutch
Sprung Center Disc
Pull Type Cover
For use w/ Hyper Accessory Kit MZAK102
Clamp Load: 2205
Disc Diameter: 7.9in./200mm
Kit Contents: CM02S, PP02, IM01, DM09DA, DM09DB, FR01, FM10, BS05, BS01, PR01, BF07
Spline Count: 23
Spline Size: 1 1/16in./26.2mm
Torque Capacity: 511 ft/lbs.
Application
• 93-95 Mazda RX-7 R2 1.3 (Requires Counterweight N351-11-521)
Beefcake Racing is an Authorized Dealer for Exedy Racing call 1-855-827-7223, 9am-9pm EST
WARNING: This product contains chemicals known to the State of California to cause cancer. For more information visit - www.p65warnings.ca.gov
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov