Application: Ford 2011-14 Mustang 5.0 GT
* Rated at a 636 hp. 538 ft. lbs. gains over stock
* Includes tuner, fuel injectors, intercooler and fuel rails.
* All necessary hardware included for installation.
* Efficient TVS 2300
STAGE 2 - TRACK SYSTEMS
These systems include the components from the Stage 1 system with the addition of a cold air intake (if required), smaller pulley, fuel injectors (if required), fuel pump (if required) and a custom tune, giving you great performance for the track. These systems are for competition racing only and are available as a complete kit or as an upgrade. The supplied tune is intended for completely STOCK vehicles with the exception of a catback exhaust.
System Features:
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)
Cast Aluminum Front Drive Bracket
Heavy Duty Automatic Belt Tensioner
Dual-Pass 3-Core (DP-3C) 160 Sq-in Intercooler
Dual Core Low Temp. Heat Exchanger for Intercooler System
Goodyear® Gatorback™ Serpentine Belt
Electric Intercooler Water Pump
Intercooler Recovery Tank
Custom Molded Intercooler Hoses
Fuel Injectors (50 lb/hr)
Steel Idler Pulleys With Heavy Duty High Speed Bearings
High Flow Panel Air Filter for Stock Airbox
Edelbrock Aluminum Engine Covers
Extruded Aluminum Fuel Rails
Handheld Calibration Module
Plug & Play, Electrical Harness & Installation Hardware
These Edelbrock E-Force Supercharger systems will boost the performance of your Mustang to impressive levels without changing the daily driving characteristics. These Mustang Supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. E-Force superchargers provide the most power at the lowest amount of boost, resulting in performance that is safe to operate on a completely stock engine.
SPECS
Manufacturer | Edelbrock |
---|---|
Application | Application Specific |
UPC | 00085347158966 |
System Type | Stage 2 |
Vehicle Model | Mustang |
Housing Material | Cast Aluminum |
Gasket Or Seal Included | Yes |
Quantity | Kit |
Oil Capacity | 150 mL |
Center Housing Cooling Type | Intercooler |
Internal Step Up | Yes |
Mounting Bracket Included | Yes |
Outside Pulley Diameter | 3.25 in |
Maximum Torque | 538 ft-lb |
Fuel Injector Type | 50 lb/hr |
Maximum Horsepower | 636 |
Availability Note | Available to Order |
Warranty | None |
Emissions Code | For Racing Use Only |
Hazardous Materials Warning | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Installation Notes |
|
Finish | Black Powder Coated |
Maximum Boost Pressure | 10 |
Pulley Belt Width | 6-Rib |
Universal Or Specific Fit | Specific |
Beefcake Racing is an Authorized Dealer for Edelbrock, call 1-855-827-7223 for more info.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov