The Edelbrock E-Force Supercharger Stage 1 Street system part # 15890 for 2010 Mustangs increases the performance of your 4.6L 3V engine to 466 horsepower and 439 ft/lbs. of torque at the crank when used with Edelbrock tune (kit supplied without a programmer). The core of this system is the Eaton Gen VI 2300 TVS Supercharger rotating assembly with a four lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. They also designed the superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. The unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger. **Handheld programmer not included** Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program, which can be downloaded at www.edelbrock.com. For safety, the Edelbrock supplied program will retain the factory vehicle speed limiter setting.
SPECS
Manufacturer | Edelbrock |
---|---|
Application | Application Specific |
UPC | 00085347158904 |
System Type | Stage 1 - Street System |
Vehicle Model | Mustang |
Grade Type | Performance |
Housing Material | Cast Aluminum |
Gasket Or Seal Included | Yes |
Quantity | Kit |
Oil Capacity | 150 mL |
Center Housing Cooling Type | Intercooler |
Internal Step Up | Yes |
Mounting Bracket Included | Yes |
Outside Pulley Diameter | 3.875 in |
CARB Executive Order Number | D-215-89 |
Fuel Injector Type | 41 lb/hr |
Availability Note | Available to Order |
Warranty | 36 Months |
Emissions Code | For Race Use Only |
Hazardous Materials Warning | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Installation Notes |
|
Finish | Black Powder Coated |
Maximum Boost Pressure | 6 |
Outside Diameter | 3.875 in |
Pulley Belt Width | 6-Rib |
Universal Or Specific Fit | Specific |
Beefcake Racing is an Authorized Dealer for Edelbrock call 1-855-827-7223 9am-9pm EST
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov