Aeromotive Universal 3.5gpm Brushless In-Tank Pump 18374

The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 3.5 Brushless Gear pump provides the Pro-Series Fuel Pump performance the world has come to trust and depend on, now available with the latest Spur-Gear pumping mechanism and brushless-motor technology. Built for up to 90 psi of sustained pressure, this new pump supports Pro-Series flow at higher pressures with minimal drop in flow. This new brushless spur-gear pump is able to move more fuel and sustain higher pressures without failure.

 

Brushless motors employ sensors to monitor rotor angle to provide faster and more reliable phase shifting, producing more torque capacity and motor efficiency. Instead of the armature rotating, in a brushless motor the magnets rotate around the armature and the motor controller manages the phase shift to keep the motor rotating under load (load is related to pressure in a fuel pump). With more torque per watt and a higher torque to weight ratio, brushless motors produce lower noise and deliver higher reliability.

 

With a higher level of efficiency, down to fractions of a second in design speed control, the new Aeromotive brushless fuel pumps provide precise control of fuel pump RPM as pressure rises, better maintaining pump RPM and flow, producing a flatter flow curve. Tight tolerances result in less current draw, less heat and extended life. Now there is the ability to upgrade to a premium brushless pump for faster, more reliable and uninterrupted fuel delivery with less power consumption and potential for wear or failure.

 

Features & Benefits

• E85 Compatible, reduce max FWHP by 30 percent

• Lighter than the traditional Pro-Series pump

• Reduced current draw at higher, EFI pressures

• Extended service life in methanol and ethanol

• New integral spur-gear pumping mechanism

• 90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost

• Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability

• ORB-10 outlet port

• Requires straight 12-VDC to 16-VDC power supply

• Not compatible with pulse modulated systems or fuel pump speed controllers

• EFI Rated flow of 1,250 lbs./hr. at 40 psi, 13.5 volts

• Carb Rated Flow of 1,350 lbs./hr. at 9 psi, 13.5 volts

 

Beefcake Racing is an Authorized Dealer for Aeromotive call 1-855-827-7223, 9am-9pm EST

 

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov