null

UPR Products Dual Valve Oil Catch Can CSS Plug N Play (2015 - 2023 Mustang GT SC) 5030-146-1-CSS

UPR Products 2015-2023 Mustang GT Oil Catch Can Vortech Paxton Procharger Dual Valve CSS Plug N Play for Superchargers 5030-146-1-CSS

Image is a representation of this item.
Actual item may vary.

Item#:
5030-146-1-css
Price: $369.99
(4 reviews) Write a Review

15-23 Mustang 5.0 Paxton Vortech Procharger Supercharged Dual Valve Oil Catch Can CSS Plug N Play

Get the ultimate oil separator for your 2015-2023 Ford Mustang 5.0 GT or 5.2 GT350 with Paxton, Vortech or Procharger Supercharger!  UPR's Dual Valve Catch Can w/Clean Side Separator provides airflow through the catch can system throughout the RPM range.  Perfect for your street or track driven 5.0L Coyote equipped S550 Supercharged Mustang!
 
The Dual valve catch can will not only circulate through during low speed driving and idle ( when there is manifold vacuum ) , it will allow circulation and crank case evacuation when under BOOST through the UPR Wide Open Throttle hose.

The UPR Clean Side Separator allows fresh, filtered air from the air inlet tube to enter the crank case as the factory intended, but will separate oil vapor and keep it from exiting the clean side when crank case pressure is high. Once normal driving resumes, the air entering the engine will pull the oil mist back in.

* This UPR catch can kit is designed to be used with the supercharger air inlet tube and air filter provided with the Procharger, Paxton, or Vortech kits.  Any other tube will require modifications to the CSS and WOT hoses.  NOT for use with a Blower Guard or screen type inlet.  For Blower guard applications UPR breather tank 5029-220 or 5029-221 is recommended.
 
 You can be sure that no other manufacturer can give you the level of quality or performance of a UPR Pro-Series Catch Can. Offering the largest capacity in a compact design to be sure that it can eliminate oil vapors on vehicles that are normally aspirated or power added equipped. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.
 
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY.  NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
 
The UPR Plug N Play  Catch Can Kits come complete and ready to install.  Select your year from the drop down menu.  You can select upgrades for your kit from the drop-down menus.
 
Upgrades available:
 
  • The Billet Pro Series check valve is a larger, higher flowing check valve than our standard check valve.  It generally will increase the vacuum through the catch can and equate to better PCV evacuation.  Better evacuation can translate to better MPG and low speed drivability.
  • The One way crankcase breather is a breather with a one way valve in it.  It allows excess crankcase pressure to exit through the breather when under boost.  It will close when crankcase pressure is normal, and keep un metered air from entering.  Installation can't be easier!  Just remove your oil fill cap and install the UPR Billet One Way Breather.  Highly recommended on Boosted engines.
  • The Stainless Steel magnetic drain plug would replace the drain plug on the bottom of the catch can with an Allen head plug that has a magnet embedded into it. It will attract any ferrous metal material to it so the user can inspect it.
  • The drain line kit is our most popular drain option. It includes a drain valve, hose and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area.  ( You would choose either the Magnetic Drain Plug, or the Drain line kit - not both.  If no drain option is selected, a standard plug will be installed)
The UPR catch cans have an O ring seal on the containment cup.  Replacement O rings are available if you lose, drop, or tear an O ring when servicing the catch can.  It's not a bad idea to have a spare set in the glove box. 
 
Features:
  • 8oz Capacity
  • Show Quality Finish
  • Prevents Oil from Entering Intake
  • Exclusive 4 Chamber Design Traps Oil
  • High Quality CNC Machined Billet Aluminum
  • Plug N Play fittings at Can & Separator connections
  • Improves Fuel Economy, Throttle Response & Performance
  • 5/8" Oil Resistant Goodyear Braided Hose included
  • Available in Black Anodized Finish

Includes:

  • Adjustable Mounting Bracket
  • OEM 5/8" Factory Connectors
  • 5/8" Goodyear Braided Hoses
  • Billet Hose Ends with Clamps
  • Hi-Flo Billet Check Valve
  • Plug N Play quick release connectors & billet fittings
  • Dual Valve Billet Catch Can (Exclusive 4 Chamber Design)
  • Clean Side Separator (Multi Stage Filtration) New Low Profile Design

Fitment:

- 2015 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2016 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2017 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2018 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2019 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2020 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2021 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2022 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

- 2023 Ford Mustang GT with Procharger Paxton or Vortech Supercharger

 

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

4 Reviews

Customers Also Purchased
Similar Products